On-site Treatment – Site Remediation at Bulk Liquid Tank Terminal

STORM WATER LIFT STATION PROJECT DETAILS

Upgrading of a tank terminal located alongside San Francisco Bay required the placement of a two-foot wide slurry wall 10′ deep around the 25-acre bulk liquid storage facility to contain any ground and surface water that may have become contaminated. The wall, combined with a layer of impervious mud below the site contains all surface and ground water from draining off the site. 

A storm drain system collects this water, which is drained to the concrete wet well of the Romtec Utilities package storm water pump station. Collected storm water is transferred into an oil-water separator. The treated water can then be discharged into the bay.

Click here to read about this project in Industrial WaterWorld.

Click here to read more in TechNotes newsletter.

THIS ROMTEC UTILITIES SYSTEM INCLUDES

Customer specified items: Hand-off-automatic controls with a pump alternator
Precast concrete wet well: 6’ dia. x 15’ deep, fall & confined space entry control
Pump system control panel w/pump disconnect plug-in-receptacles: with free air stand, cable hatch
Wet well pipe & accessories: all stainless steel
ITT Flygt submersible pumps: NP3127 MT, 10 HP
Liquid level monitoring & control: Primary – ITT Flygt ENM-10 floats
Above-ground valve assembly on precast concrete slab: 6" system, ball check & plug valves, discharge pressure gauges
Pumping system electrical controls: UL listed
Pump station communication system: Dry contacts, owner-provided SCADA

PDF with ADDITIONAL DETAILS

PDF with DRAWING

Services included with every Romtec Utilities Pump/Lift Station

Free pump/lift station sizing, pump performance curve, design proposal, quotation
All pump/lift station engineering – structural, mechanical, electrical – coordination with site engineer(s)
Pumping system submittals – CAD drawings, design and materials specifications
Sewer/water regulatory agency coordination and submittal approval assistance
Factory assembly of complete pre-packaged lift stations (prefabricated pumping systems)
Coordinated delivery of complete pump station to project site
On-site construction advisor and pump station start-up services
Operation and Maintenance (O&M) manuals
On-site training of operation and maintenance personnel